Model Name/Number | SSR-MP1-SL |
Brand | IGIS make |
Country of Origin | Made in India |
Packaging Type | Carton Box |
Usage/Application | Industrial |
Frequency | 50 Hz |
Voltage | 380 V |
The IGIS Microprocessor based Signal Enhancement Resistivity Meter Model SSR-MP1-SL is a high quality microprocessor based data acquisition system incorporating several innovative features. The instrument design incorporates several advanced techniques of digital circuitry to make it reliable geophysical tool that provides high quality data useful for all types of mineral and groundwater exploration research etc.
Surface Resistivity: The instrument sends the entire current into the ground without wasting power for constant current generation thus increasing the signal strength to probe deeper layers.
The advanced design of Resistivity Meter achieves excellent depth penetration with relatively low power transmission. It utilizes the signal stacking upto 99 successive readings to achieve the beneficial signal enhancement..
Bore hole logging: Powered by internal rechargeable batteries, instrument provides spot measurements of Short Normal, Long Normal, Point Resistance and SP and finds extensive application in groundwater exploration, engineering studies and other lithological investigations.
Instructions for field personnel for operation and maintenance of instrument are minimal and the logging party does not have to depend on specialized technicians for routine operation.
Brand | IGIS make |
Material | ABS enclosure |
Country of Origin | Made in India |
Model No. | SSR-MP1 |
Weight | 4.4 Kg |
Dimension | 270 X 246 X 175 mm |
Maximum Current Range | 2A |
Storage Temperature | -20 Degree Celsius - 60 Degree Celsius |
The instrument design incorporates several advanced techniques of digital circuitry to make it reliable Geophysical tool that provides high quality data useful for all types of mineral and groundwater exploration research etc. The SSR-MP1 sends the entire current into the ground without wasting power for constant current generation thus increasing the signal strength to probe deeper layers. The advanced design of SSR-MP1 Resistivity Meter achieves excellent depth penetration with relatively low power transmission. It utilizes the signal stacking up to 99 successive readings to achieve the beneficial signal enhancement. In the presence of random (non-coherent) earth noises, the signal to noise ratio of the SSR-MP1 measurement will be enhanced by N where N is the number of individual readings. Hence SSR-MP1 Resistivity meter can be used for depths of up to 600m under favorable geological conditions.
Applications:
Ground Water Exploration
Sand and Gravel Deposit Identification
Bed Rock Investigations
Mineral Investigations
Delineation of Geological Structures
Geophysical Field Training
Resistivity Sounding /profiling /imaging /strip profiling.
Brand | Integrated Geo |
Material | ABS enclosure |
Country of Origin | Made in India |
Model No. | SSR-MP-ATS |
Weight | 5 Kg |
Dimension | 270 X 246 X 175 mm |
Maximum Current Range | 8A |
Storage Temperature | -20 Degree Celsius - 60 Degree Celsius |
*Your information is safe with us.
Brand | IGIS make |
Country of Origin | Made in India |
Model No. | DMPL-3 |
Packaging Type | Carton Box |
Usage/Application | Industrial |
Frequency | 50-60 Hz |
Voltage | 480 V |
Temperature | 0 to 50 Degree C |
The DMPL-3 Continuous Well Logger is a highly portable, sturdy and easy to operate microprocessor-based Digital Multi Probe Borehole Logger. The equipment can be dismantled and carried to remote areas by head-load. The special design features incorporated make this DMPL-3, a highly versatile instrument suitable for high quality data acquisition, an essential pre-requisite to tackle wide variety of geological and geophysical exploration problems. DMPL-3 is capable of continuous logging of S.P, Point Resistance, Short Normal, Long Normal, Lateral Resistivities, GAMA and Caliper. The logger can be operated with user-friendly interface through notebook P.C. The acquired data is stored and displayed on P.C. Hard copy can be obtained through Inkjet printer to the required sensitivity/scale. The equipment can withstand temperatures 0-500 C and high humidity conditions.
Model Name/Number | IGIS / WLI-C |
Usage/Application | water level monitoring |
Brand | IGIS |
IGIS Water Level indicator with counter mechanism is a very handy device to quickly check the level of water in open wells and in borewells.
SPECIFICATIONS:
Length of the cable |
: |
100m/200m /300m
|
Indication |
: |
LED & Buzzer sound
|
Power Supply |
: |
9 Volts battery
|
Weight |
: |
6 Kgs. approximately |
|
|
|
A sensor attached to the end of a cable, wound on a winch is lowered in to the well. over a calibrated wheel attached to the counter mechanism. The moment the sensor touches the water surface, a panel meter on the winch which is on the ground shows full deflection with buzzer sound. The depth to the water level from the ground can be read off in metric scale on the counter.
Brand | IGIS make |
Material | ABS enclosure |
Country of Origin | Made in India |
Model No. | DDR3 |
Weight | 4 Kg |
Dimension | 250 X 226 X 150 mm |
Maximum Current Range | 6A |
Storage Temperature | -20 Degree Celsius - 50 Degree Celsius |
Packaging Type | Carton Box |
*Your information is safe with us.
Brand | IGIS make |
Country of Origin | Made in India |
Packaging Type | Carton Box |
Usage/Application | Industrial |
Frequency | 50-60 Hz |
Voltage | 330 V |
Model No. | SSR-MP-AT-SAL |
The IGIS signal stacking based Signal Enhancement Resistivity Meter Model SSR-MP-AT-SAL is a state of art microprocessor based data acquisition system. The instrument design incorporates several innovative features and advanced techniques of digital circuitry to make it a reliable geophysical tool providing high quality data useful for mineral and groundwater exploration and any other geophysical applications.
The SSR-MP-AT-SAL sends the entire current into the ground without wasting power for constant current generation thus increasing the signal strength to probe deeper layers.
The advanced design of SSR-MP-AT-SAL Resistivity Meter achieves excellent depth penetration with relatively low power inputs. It utilizes the signal stacking up to 16 successive readings to achieve good signal enhancement. In the presence of random (non-coherent) earth noises, the signal to noise ratio of the SSR-MP-AT-SAL measurement will be enhanced by ÖN where N is the number of stacks. Hence
SSR-MP-AT-SAL Resistivity Meter can be used for depths of upto 600m under favorable geological field.